Contact Us | Site Map
Timber Edge
  • HOME
  • NATURE'S EDGE
  • TIMBER CHINK
  • TIMBER MATCH
  • TIMBER GRIP
  • TIMBER SET
Product Description

What is Timber Match™?

Timber Match™ is a new, state-of-the-art textured product designed to blend in with today’s most popular stain colors. Timber Match can be either a chinking alternative for those who prefer to minimize a noticeable chink line but require a weather and pest tight seal or for filling checks, cracks and corners in the most subtle way possible.

Product Features

The Chink-less Alternative ™

 color pallet provides a “mirage” effect
 closely matches hues of stained wood
 remains flexible and pliable after full cure even at low temperatures
 high solids content, reduced shrinkage
 fill and conceal weather checks and voids
 exterior and interior sealant
 easy to apply and tool
 advanced mildew and fungal inhibitors
 paint-able and stainable
 soap and water clean-up

Timber Match Color Palette™
colors
General Production Information

Colors: Pinewood, Woodlands, Weathered Gray, Pine Cone, Café, Light Pine, Teak, Pine, Spruce, Natural, Redwood, Cedar
Packaging: 5-gallon pails, 29 fluid oz. fiber cartridges (10 per carton) and 10.5 fluid oz. plastic tubes (12 per carton)
Shelf Life: 12 months from purchase when stored in a tightly sealed container between 45°F and 90°F.
VOC: 35 grams/liter
Cure Time: 3 weeks (1/2” thickness, 77°F, 50% relative humidity). Timber Match is tack-free in 1-2 hours.
Freeze-Thaw: Passes 5 cycles
Slump: greater than 1/16” (ASTM D2202)
Service Range: -30°F to 220°F
Application Range: 40°F to 95°F
Weathering: No washout, no cracking and no discoloration. UV resistance QUV (1000 hours) testing shows no effect.
Compatibility: Compatible with most sealers, preservatives and stains. Some coatings contain wax or petroleum based oils that can make adhesion more difficult.
Hazard Warning: Health 1 Flammability 0 Reactivity 0

Performance Standards & Precautions

Performance Standards

Timber Match™ is formulated to surpass the industry performance standards for adhesion, elongation and tensile strength.
 ASTM C834 – Latex Sealants
 ASTM D-638 – Tensile Properties (elongation: 300%, tensile strength: 42 lbs/in2)
 ASTM-C920(12.5) – Elastomeric Joint Sealant

Precautions

Do not take internally.
Keep out of the reach of children.

Links to Supporting Documents

Timber Match Spec Sheet
MSDS for Match
Timber Edge Application Guidelines

Contact Information

Timber Edge Products
2222 Park Place, Building 2A
Minden, NV 89423

Phone: 775-782-8750
Fax: 775-782-8213
Toll-free: 888-564-6862

email: TimberEdgeProducts@yahoo.com
email: NaturesEdgeFinish@gmail.com

© 2011 Timber Edge Products, LLC. All rights reserved.